Generally speaking, there are quite a large number of ink-jet advertisements. The ink-jet interface is exquisite and real, and the restoration degree is very high. However, if the general processing method is not correct, it will cause rapid fading, and the fading ink-jet advertisements can not achieve the actual effect of the original propaganda planning. Today, the editor is here to explain the reasons for the fading of the ink-jet advertisements. Prevention in many ways.
喷绘艺术照广告以便做到超清，色饱和度好，一般选用的黑墨水全是水溶性黑墨水，就算一些喷绘广告干了过膜，也难以避免的受着防潮和紫外光的困惑。喷绘广告褪色关键原因小结以下内容。
In order to achieve super clear and good color saturation, the general black ink is water-soluble black ink. Even if some ink-jet advertisements are dried, it is difficult to avoid the confusion of moisture-proof and ultraviolet light. The key reasons for the fading of spray painting advertisements are summarized as follows.
1.喷绘广告长期性在紫外线照射自然环境下能褪色
1. Spray painting advertisement can fade under ultraviolet radiation for a long time
2.喷绘广告的黑墨水与别的化学物质产生化学反应造成褪色
2. The black ink of spray painting advertisement reacts with other chemicals to cause fading
3.喷绘广告在太阳白晒和日晒雨淋自然环境下的脆化而褪色
3. The embrittlement and fading of spray painting advertisements in the natural environment of sunlight and rain
4.喷绘广告在房间内，若是曝露在紫外光超标准的照明灯具下时间长也会造成褪色
4. Spray painting advertisement in the room, if exposed to ultra standard UV lighting for a long time, it will also cause fading
5.喷绘广告的喷绘画板品质决策褪色水平，吸墨性和渗墨性就越好，它对广告上应用黑墨水的使用寿命也就越长。
5. The quality of the inkjet board of the inkjet advertisement determines the fading level, the better the ink absorption and ink penetration, and the longer the service life of the black ink used in the advertisement.
6.喷绘广告的过膜原材料镀层上若是有金属氧化物也导致褪色
6. If there is metal oxide on the coating of the coated raw material of spray painting advertisement, it will also lead to fading
7.喷绘广告在过膜时，要确保喷绘艺术照黑墨水彻底干躁，不然也会凝固界面造成褪色。
7. Make sure that the black ink of the ink-jet art photo is completely dry when the ink-jet advertisement passes through the film, otherwise it will solidify the interface and cause discoloration.
