广告牌作为一种宣传手段，对于现代的商业运作是有很大帮助的，它承担了一种信息传播的作用，对于公司来说好的广告方式，意味着高速的信息传播效率。今天我们广告牌制作厂家，就带大家了解一下安装的注意事项有哪些。
As a means of publicity, billboard is of great help to modern commercial operation. It undertakes the role of information dissemination. For companies, good advertising means high-speed information dissemination efficiency. Today, our billboard manufacturer will take you to know what the installation precautions are.
1.明确安装顺序：立柱吊装广告牌框架安装广告牌面板安装零星构件安装。
1. Clear the installation sequence: column hoisting billboard frame installation, billboard panel installation, sporadic component installation.
2.基础复核：安装前，安排相关技术人员对基础进行测量复核。检查内容包括：基础平面应平整，不得有裂缝、蜂窝、露筋等。基础的横向中间线和纵向中间线应垂直;基础尺寸偏差不大于20毫米。
2. Foundation review: before installation, arrange relevant technical personnel to survey and recheck the foundation. The inspection contents include: the foundation plane should be flat without cracks, honeycomb, exposed reinforcement, etc. The transverse middle line and longitudinal middle line of the foundation shall be vertical; the foundation dimension deviation shall not be greater than 20 mm.
3.应选择安装车辆的安装地点，地质条件应稳定，不得损害绿化;提升高度不宜过高或过低，以于提升扣件的高度和安装需要适度调整;用缆风绳调整立柱的垂直度，避免人员靠近调整造成隐患;经纬仪校准装置的垂直度小于10毫米。
3. The installation site of the vehicle should be selected, the geological conditions should be stable, and the greening should not be damaged; the lifting height should not be too high or too low, so that the height and installation of the lifting fastener need to be adjusted appropriately; the verticality of the column should be adjusted with cable wind rope to avoid the potential safety hazard caused by personnel approaching the adjustment; the verticality of theodolite calibration device should be less than 10 mm.
4.广告牌的安装除了注意吊装过程中的问题外，还应注意焊接的牢固性和接缝处的防腐工作;吊装过程中应注意调整广告牌框架是否倾斜，并应不断调整，直达到位置。整个过程要有专人指挥，有哨子统一操作。
4. In the installation of billboards, in addition to the safety problems in the hoisting process, attention should also be paid to the firmness of welding and the anti-corrosion work at the joints; attention should be paid to whether the billboard frame is inclined or not during the hoisting process, and it should be adjusted continuously until it reaches the safe position. The whole process should be directed by special personnel and operated by whistles.
5.根据图纸安装灯座和其他部件。
5. Install lamp holder and other parts according to the drawing.
可以说，广告牌的安装对于环境的协调和灵活应变是一个有难度的地方，很多人对于地点的选择和安装过程把控不好，就会有无人问津和风险出现。所以说对于广告牌制作厂家来说，还是需要多加考虑的，只有专门的广告公司才能客户的需求，达成既定的效果。
It can be said that the installation of billboards is a difficult place for environmental coordination and flexible response. If many people do not control the location selection and installation process well, there will be no one and security risks. So for billboard manufacturers, or need to consider more, only specialized advertising companies can solve the needs of customers, to achieve the desired effect.
