Good logo products are not only reflected in design, but also in data, process, display function and device mode. According to different characteristics, what kinds of signs can be divided into? Let's have a look!
01
01
标识标牌的类型：
Type of identification plate:
1、屋顶式：指在某建筑物的屋顶上设置一些固定结构物，并在上面挂着或贴着的板形活立方形或幻性的标识标牌。
1. Roof type: refers to the plate-shaped living cubic or illusory sign that is hung or pasted on the roof of a building with some fixed structures.
2、竖式：整个比例竖向比拟长。普通整面都被应用为标识标牌。比方有些景区门口的引导牌、或者医院普通都会有这样的标识牌。
2. Vertical: the whole scale is relatively long vertically. The common whole face is applied as a sign. For example, some guide signs at the entrance of scenic spots, or hospitals generally have such signs.
3、地柱形：标志在空中的某些固定结构上的横形、竖形、平面形的标识标牌。这种就是会呈现在公园花园里面，或者大型的道路标牌。
3. Ground pillar: a horizontal, vertical, or plane sign marking certain fixed structures in the air. This is what will be shown in the park garden, or large road signs.
4、突形：在建筑物的墙面上突出，除了反面以外的整面或有两侧墙面的状况下，两侧都被应用为广告载体的标识标牌。这种就表现在有的公司门口的LOGO或者是带点欣赏性的标识牌。
4. Protrusion: it is prominent on the wall surface of the building. In the case of the whole or two sides of the wall except the opposite side, both sides are used as the signs of the advertising carrier. This kind of logo is displayed at the door of some companies or with some appreciative signs.
5、横式：整个比例横向比拟长。普通整面都被应用为标识标牌。普通在小店铺和大建筑的墙面或者酒店都能够看到。
5. Horizontal: the whole proportion is relatively long horizontally. The common whole face is applied as a sign. It can be seen on the walls of small shops and large buildings or in hotels.
02
02
标识标牌的制作工艺
Manufacturing process of signs
一、铝合金型材要求
1、 Requirements for aluminum alloy profiles
契合铝合金标牌型材的质量要求。铝合金型材的角底偏向少于正负偏向1度。平面间隙<=0.4%*B(B为型材宽度)。
Conform to the quality requirements of aluminum alloy sign profiles. The angle bottom deviation of aluminum alloy profile is less than 1 degree of positive and negative deviation. Plane clearance < = 0.4% * B (B is the profile width).
二、亚克力标牌加工的要求
2、 Acrylic label processing request
尺寸及外形分歧，外表无气泡及划痕。外表经过粗砂、细砂、碾磨处置，保证其外表平滑无台阶。完成后外表光泽温和平均、无颗粒状物、无气泡、透光平均。
The size and shape are different, and there is no bubble or scratch on the surface. The surface is treated with coarse sand, fine sand and grinding to ensure that it is smooth without steps. After completion, the surface luster is mild and average, without particles, bubbles and light transmittance.
三、不锈钢工艺要求
3、 Stainless steel process requirements
不锈钢板须刨坑折弯焊接（不锈钢板须先刨坑之后折弯，以保证边缘挺拔度）；
The stainless steel plate shall be planed, bent and welded (the stainless steel plate shall be planed first and then bent to ensure the edge straightness);
保证折弯处圆弧角R＜1MM。肃清外表的油污，减少焊缝构成的虚焊、气孔、裂纹等缺陷。焊接完后将一切可见焊缝打磨润滑，与四周外表一样平滑，无明显划痕。
Ensure that the arc angle R at the bend is less than 1mm. Eliminate the oil stain on the surface, and reduce the defects such as faulty welding, air hole and crack formed by the weld. After welding, all visible welds shall be polished and lubricated, as smooth as the surrounding surface, without obvious scratches.
四、烤漆工艺要求
4、 Paint baking process request
清洗外表残留物，补灰，打磨等一系列外表处置。采用型油漆烤漆处置。烤漆房须无尘埃颗粒车间，烤漆外表涂层三涂三烤处置，涂层厚度大于或等于35微米。
A series of surface treatment, such as cleaning the surface residue, mending the dust, polishing, etc. Use environment-friendly high-quality paint for baking. The paint room shall be free of dust particles, and the external coating of the paint shall be painted three times and baked three times, and the coating thickness shall be greater than or equal to 35 microns.
五、油漆颜色要契合设计计划要求
5、 Paint color shall meet the requirements of design plan
面漆膜应平滑、平均，不允许呈现流痕、皱纹、桔皮、气泡、夹杂等影响装饰效果的缺陷。
The top coat film shall be smooth and average, and shall not show flow marks, wrinkles, orange peel, bubbles, inclusions and other defects affecting the decoration effect.
六、丝印工艺要求
6、 Silk screen printing process requirements
菲林冲制网版，丝印外表用酒精或白电油将外表清算洁净。
Feilinchong screen, silk screen surface with alcohol or white oil to clean the surface.
丝印颜色要契合设计计划请求，字体及图案笔划明晰，无变形、锯齿等缺陷。
The color of silk screen should meet the requirements of the design plan. The font and pattern strokes should be clear without deformation, sawtooth and other defects.
丝印图形文字颜色与底色比照无明显浸透现象。
There is no obvious saturation between the color of silk screen graphics and the background color.
七、竣工外观要求
7、 Finished appearance requirements
装置完成后标识牌外观精巧，外表无螺钉，无划痕、气泡及明显的颜色不平均，烤漆须无明显色差，所用资料契合设计计划请求。
After the completion of the device, the appearance of the signboard is exquisite, without screws, scratches, bubbles and obvious uneven color. The paint must have no obvious color difference. The data used shall meet the requirements of the design plan.
不论是以上哪种标识牌，其表现出的作用很简单，要不就是引导，要不就是欣赏、要不就是警示、要不就是辨别，分类等等这些他们这些都不断和我们的生活离不开，因而我们在选择不同形态的时分，就会想到的是，他能否合适我们要想表达的内容。只要晓得我们的需求和想法，才干更好的去为我停止选择形态的表达方式。
No matter which kind of signboard is above, its function is very simple. It is either guidance, appreciation, warning, discrimination, classification and so on. They are all inseparable from our life. Therefore, when we choose different forms, we will first think about whether it is suitable for the content we want to express. As long as we know our needs and ideas, we can better choose the form of expression for me.
