There are many installation methods of signs in the production of door advertisement, which can be subdivided according to the installation basis and production technology. The main installation methods are as follows:
1，地面类型：根据设计要求，标识可放置在相应位置。
1. Ground type: according to the design requirements, the sign can be placed in the corresponding position.
2，悬挂式：主要材料有链条、电缆、钓鱼线和系紧装置。根据室内外环境、标牌重量等特殊要求，采用合适的起重材料。
2. Hanging type: the main materials are chain, cable, fishing line and fastening device. According to the indoor and outdoor environment, sign weight and other special requirements, the use of appropriate lifting materials.
3，填埋场类型：适用于地面为土结构，标志不需要移动的情况。根据标记的尺寸和高度，开挖坑的尺寸应根据混凝土用量确定。施工中应注意周围环境。标记完成后，应清理现场，恢复花草并浇水，以免损坏。
3. Landfill type: it is suitable for the situation that the ground is soil structure and the sign does not need to be moved. According to the size and height of the mark, the size of the excavation should be determined according to the amount of concrete. Attention should be paid to the surrounding environment during construction. After marking, the site shall be cleaned, the flowers and plants shall be restored and watered to avoid damage.
4，糊型：该方法应用广泛。所用胶粘剂有玻璃胶、AB胶、泡沫胶、海绵胶、双面胶、三氯甲烷、结构胶等。应根据不同的材料和基础、使用时间的长短、安装环境的差异、室内外干湿度、温差等条件选择合适的胶粘剂。
4. Paste type: this method is widely used. The adhesive used is glass glue, AB glue, foam glue, sponge glue, double sided adhesive, trichloromethane, structural adhesive, etc. The suitable adhesive should be selected according to different materials and foundation, service time, installation environment, indoor and outdoor dry humidity, temperature difference and other conditions.
5，拔出螺钉固定：此方法适用于地基基础的混凝土结构，标志不需要移动，如路标、停车场标志大多采用此方法。
5. Pull out the screw for fixation: this method is applicable to the concrete structure of foundation, and the signs do not need to be moved, such as road signs and parking signs.
门头广告制作找中标志牌的几个关键点：
There are several key points in the production of door advertisement
1，标志和颜色。标牌的清洁与否与所用的颜色有很大关系，标牌的大小相同，标牌上文字符号的颜色不同，无论是清晰可见都是非常不同的。一般来说，警告级别越高，使用的颜色越亮，颜色对比度越大。
1. Logo and color. Whether the sign is clean or not has a great relationship with the color used. The size of the sign is the same, and the color of the text symbols on the sign is different. Whether it is clear or visible, it is very different. Generally speaking, the higher the warning level, the brighter the color used and the greater the color contrast.
2，标志形状。标志的形状，特别是交通标志，必 须用我国标准来表示。如果没有标准规范，我们应该注意是否容易识别。
2. Logo shape. The shape of signs, especially traffic signs, must be expressed by Chinese standards. If there is no standard specification, we should pay attention to whether it is easy to identify.
3，符号大小。根据人眼测试，相同视距下的标志越大，识别时间越短。相反，标识时间越长，大小设置取决于我们期望完成标识的时间。当然，前提是这种大小的正常人也可以在视觉距离的远点看到。例如，在高速公路上，车辆的速度很快，驾驶员需要在短时间内识别出识别信息，因此公路标志比一般的城市道路标志大得多。
3. Symbol size. According to the human eye test, the larger the mark is, the shorter the recognition time is. On the contrary, the longer the identification time, the size setting depends on the time we expect to complete the identification. Of course, the premise is that normal people of this size can also see it at a distance. For example, on the highway, the speed of vehicles is very fast, the driver needs to identify the identification information in a short time, so the road signs are much larger than the general urban road signs.
4，文本符号，在标志上书写的文字、符号或图案的数量是规定的，因为尺寸应该是可见的，标识标牌应该在短时间内完成。
4. Text symbol. The number of words, symbols or patterns written on the sign is specified, because the size should be visible, and the sign should be completed in a short time.
感谢您的阅读，希望以上内容对您有所帮助，如您想了解更多精彩内容请点击我们的官网：济南标识标牌制作公司https://www.hongchenad.com 。
Thank you for reading, hope the above content is helpful to you, if you want to know more wonderful content, please click on our official website: Jinan sign production company https://www.hongchenad.com .
