Now there are a lot of advertising signboard fonts made of acrylic materials, not only that, because acrylic is easy to machine processing, high transparency, so that acrylic products are widely used. So how to maintain the acrylic billboard? Please remember the points.
1、避免热膨胀：亚克力的热膨胀系数较大，应留有足够的空间。
1. Avoid thermal expansion: the coefficient of thermal expansion of acrylic is large, and enough space should be reserved.
2、进行打蜡：若要制品光鲜亮丽，可用液体抛光蜡后用软布均匀擦洗即可；
2. Waxing: if you want the product to be bright and bright, you can use liquid polishing wax and then scrub it with soft cloth evenly;
3、环境温度：受热70度左右就会变形，假如受热100度以上就会软化，所以需求避免运用于100度以上之处；
3. Environment temperature: when heated to about 70 ℃, it will deform. If it is heated to more than 100 ℃, it will soften. Therefore, it is required to avoid using it at places above 100 ℃;
4、避免裂损：亚克力外表硬度相当于铝，在取放进程都应该留意外表的保护；
4. Avoid cracking: the surface hardness of acrylic is equivalent to that of aluminum, and attention should be paid to the protection of the surface in the process of taking and placing;
5、清洗问题：假如是日常灰尘的处理可以直接用鸡毛掸或清水冲洗，然后再用软质布料进行擦洗就可以了。假如是油污那么就需求用软性洗洁剂加水，也是再用软质布料进行擦洗就可以了；
5. Cleaning problem: if it is daily dust treatment, you can directly use chicken feather duster or water washing, and then use soft cloth to scrub it. If it is greasy dirt, then need to use soft detergent to add water, but also use soft cloth to scrub it;
6、呈现破损：若制品不小心破损可运用IPS粘接胶水/粘合剂二氯甲烷类之黏着剂或快乾剂进行粘接；
6. Damage: if the product is damaged accidentally, IPS adhesive / adhesive dichloromethane adhesive or quick drying agent can be used for bonding;
7、抛光：若制品被磨损或刮伤不是很严重，可测验运用抛光机（或汽车打蜡机）装上布轮，沾适量液体抛光蜡然后均匀打光即可改进。
7. Polishing: if the products are not seriously abraded or scratched, use polishing machine (or automobile waxing machine) to install cloth wheel, dip appropriate amount of liquid polishing wax, and then polish evenly to improve.
